Zandvoort/Netherlands, 13th July 2016
This weekend marks the second foreign outing of the season, and the two races in #zandvoort (Netherlands), on the North Sea coast, pose a real challenge for any race tyre. The sharp and abrasive asphalt in particular, together with the sand blown across the track from the adjacent beach, place heavy demands on the Ventus Race. "The aggressive surface of the track puts greater strain on the race tyre's tread than at other DTM circuits. On top of this you also have the sand, which impairs grip and can result in the cars skidding. As such, it is important for the drivers to remain on the #racing line at all times, as this is soon swept clean by the cars," explains #hankook DTM race engineer Thomas Baltes.
The layout of the track, which winds its way through the dunes, is extremely varied. Top-speed straights alternate with slow sections, while fast banked corners – some of which are located behind crests – lead into narrow and technical sections. Thomas Baltes: "You need a balanced car set-up in #zandvoort, in order to cope with all the features of the circuit. You have to have the right mix of performance and safety, as you are driving at the very limit here."
Many drivers prefer their tyres to have low air pressure on the 4.307-kilometre strip of asphalt, in order to increase the contact area, and thus the grip level. As a result, the tyre construction is really put through its paces in the fast, sometimes banked corners. "Furthermore, the Ventus Race is subjected to strong downforce due to the high speeds. For this reason, having the air pressure too low can cause the tyre to wear more," the #hankook DTM race engineer explains.
Another challenge for the race tyre comes in the form of the kerbs. Some of these are very high and often damaged due to their age. Despite this, the drivers regularly take them at speed. Thomas Baltes: "The dune circuit in #zandvoort puts greater strain on the #hankook race tyre than other DTM circuits. That goes for the tread, but even more so for the construction of the Ventus Race."
The Tarzanbocht, a 180-degree corner at the end of the start/finish straight, offers the best overtaking opportunity. However, it is also possible to attack in the hairpin and the following chicane in the final sector. The track in the dunes soon becomes slippery when wet. "At first, the water mixes with the sand and forms a greasy film on the track. It is wise to be cautious then. If it continues to rain, the track is washed completely free of sand. However, whether in wet or dry conditions, the #hankook race tyre has always overcome the challenges in #zandvoort with great aplomb," says #hankook DTM race engineer Thomas Baltes. |
|